ST-III Wired and Wireless Tamper-Resistant Alarm Control Panel + 1 Motion sensor+1magnetism switch +2 remote controller
With complete defense zones type setting, telephone line cut or short alarm alert, backup battery available, voice guide, LCD for program, alarm information text and diagram showing, testing timing for auto communication test, available to connect electric switch for house appiance etc.
* 1 Control Panel(BE-100)
* 1 wireless PIR sensor(MC-55R)
* 1 wireless Magnetic contact(MD-210R)
* 2 remote controllers (PB-403R)
Function & Features of alarm panel:
1. With voice indication all around the operation.
2. LCD screen indication with text and icon.
3. Total 32 wireless zones. Each zone enable to learn code automatically or enter code manually on the keypad. Can compatible with door contact, motion sensor, glass breakage detector, smoke detector, gas detector, vibration sensor etc.
4. Total 8 wired zones to be compatible with N/O or N/C alarm detector.
5. Enable to enroll total 8 wireless remoters, 8 electronic switch, wireless door bell and unlimited quantity of one way wireless siren.
6. Zone programmable: Alarm type, delay alarm or instant alarm etc. settings for each zone can be modified.
7. Wireless detectors and remoters can be enrolled/deleted separately or simultaneously.
8. 2 CMS phone Number and 4 private telephone Number or mobile Number can be set as alarm receiving phone Number.
9. Clock & event list: Built-in clock can be set according to local time.
10. Status inspection: Enable record and inquiry 150 alarm event messages such as anti-tamper alarm, detector alarm, tel-line off, arm, disarm, system setting, low voltage and zone number and alarm type etc.
11. Password operation: administrator password is for sysem administration such as system program, detector addition, detector deletion etc. User password is for common operation such as arm/disarm, remote control etc.
12. User code can be set 4, 5 or 6 digits according to quantity of users.
13. Alarm type auto identify: When alarm triggered, the LCD will display alarm zone#, alarm type, alarm icon and will report details to CMS when it is connected to CMS.
14. Compatible with CMS machine: support contact ID. Report alarm to CMS. Report arm/disarm to CMS optional.
15. Remote control: Can arm, disarm, listen to spot, trigger siren, switch on/off electronic appliance etc. via telephone remotelly.
16. Vandal-proof function: Will alarm when wire between wired detector and panel is cut off or telephone line is cut off.
17. Tamper-Resistant: Will alarm when panel is removed or open.
18. Timing arm/disarm: Enable set 4 groups time of arm/disarm.
19. Timing testing: Panel will send signal to CMS to test the panel on-line status at preset time.
20. Siren: the panel is with built-in siren, it can also enroll extension wireless siren. Both can be set as on or off when alarming.
21. Electronic appliance control: Enable remote inquiry and control the on/off status of electronic appliance. And also enable to switch on /off manually electronic appliance.
22. Wired/wireless zone real time monitoring: active the real time monitoring function, then if zone with trouble when doing arm/disarm operation, the panel will indicate zone fault.
23. Wireless signal repeat function: Via same brand wireless repeater, it can enalbe the panel to receive signal from long distance 1~3km of alarm detector.
24. Wireless detector low battery real time warning: if wireless detector is with low battery, it will send signal to panel every one or two hours or when alarm happens, panel will sound dee dee and on LDC screen, low battery icon adn zone number will display. Panel will report to CMS and preset Phone Number as well.
25. Tel-line off and wireless transfer function: When tel line is cut off, panel will send signal to preset neighbour panel and the neighbour panel will report alarm instead.
28. Enable the panel siren by pressing the emergency key on the panel or the remote.